Skip to content
AB Contracting & Design LLC
Call

What bathtub and tile refinishing cost in Essex County, New Jersey

Refinishing, or reglazing, a bathtub averages $484 in Angi's 2026 data from 7,355 projects, and most homeowners pay $337 to $631. Reglazing the tile around it runs $4 to $12 a square foot. Replacing the tub instead averages $5,931.

Those are market figures, not an AB quote. We refinish bathtubs and tile. Below: the price by tub and by tile area, a worked example for a hall bath, New Jersey's permit, sales tax and contract rules, what EPA and OSHA say about the fumes, and the point where a bathroom remodel is the better money.

Published November 17, 2026 by AB Contracting & Design LLC, Belleville, NJ. N.J. HIC Reg. #13VH11431800. Market prices and New Jersey rules come from the sources linked below, read on the day of publishing.

Bathroom with a white tub inside a beige tile surround behind a sliding glass door, a toilet, and a wood vanity with a single sink
A tub with a three-wall tile surround: the two surfaces this page prices. A public-domain National Park Service photo, not an AB job.

Bathtub refinishing cost by type of tub

The tub's material and shape decide where a job lands. Two national guides, read on November 17, 2026: Angi, updated September 23, 2026, and This Old House, updated March 17, 2026.

Bathtub refinishing cost by type of tub, Angi 2026 and This Old House 2026 national ranges
TubAngiThis Old House
Porcelain or enamelA porcelain or hard glass coating, usually over steel or cast iron.$350–$600$350–$600
Cast ironThe standard tub before fiberglass, per Angi.$350–$600$300–$650
FiberglassNeeds more care to get a smooth finish, so it can cost more.$300–$1,000$250–$600
Claw-footDeeper inside and exposed outside, so more surface to coat.$400–$1,400$300–$650
Tub and shower combinationThe tub plus the wall surface around it.$600–$1,000$500–$1,000

None of the cost guides we read prices a New Jersey town. The nearest is Angi's New York, N.Y. page, last updated October 6, 2025: a normal range of $353 to $570, $446 on average, with porcelain and cast-iron tubs at $450 to $750 and a tub-and-shower combination at $500 to $900. Condition moves the price within any of these ranges: Angi says major cracks, deep scratches and gouges have to be filled before refinishing.

Tile reglazing cost: tub surrounds, walls and floors

Per square foot
$4–$12The same range in Angi's 2026 guide and HomeGuide's. Angi says wall and shower tile usually costs less a foot than floor tile.
A bathroom's tile
$300–$1,200HomeGuide, for 40 to 100 sq ft of bathroom, tub and shower tile.
A whole tile job
$1,080Angi's 2026 national average for reglazing tile; most pay $730 to $1,700.

What changes a tile price

  • Grout repairs or water-damage fixes before the coating: $150 to $200 per area (Angi).
  • Regrouting: $100 to $700 a project. Grout cleaning: $100 to $1,000 (Angi).
  • Ceramic and porcelain reglaze best. Glass costs more, and Angi says reglazing natural stone is often not recommended.
  • Heavy use shortens the finish: HomeGuide says reglazed tile lasts less under high moisture and foot traffic.
Older bathroom with pale yellow square wall tile and dark grout lines around a white tub and its tiled front panel, a wall-hung sink and a toilet
An older bathroom tiled around the tub and its front panel. A public-domain (CC0) photo by Alf van Beem, Mulhouse, France, 2016; not an AB job.

Worked example: a hall bath tub and surround

An example, not a quote. The surround is three walls around a 5 ft tub, tiled 7 ft high, the same one our tile guide prices: about 70 sq ft.

Worked example of refinishing a tub and reglazing its tile surround at market rates
The tubAngi's 2026 range.$337–$631
The surround, 70 sq ftAt $4 to $12 a square foot.$280–$840
Tub and surround together$617–$1,471

Our arithmetic from national ranges. Grout work, deep chip repair and any sales tax are on top.

Refinish, reline or replace: the prices side by side

Four ways to deal with a worn tub, cheapest first. National market ranges, not our prices:

Bathtub inlay, refinishing, liner and replacement cost, national market ranges
OptionMarket range
Bathtub inlayCovers the bottom of the tub only (Angi; This Old House gives the same range).$100–$200
Refinish or reglaze the tubAngi's 2026 range; $484 on average.$337–$631
Bathtub liner over the old tubThis Old House says $1,700 to $2,500; Angi says $2,700 to $10,200.$1,700–$10,200
Replace the tubAngi's 2026 range; $5,931 on average. A new surround adds $500 to $2,000.$2,105–$9,759

On averages, refinishing costs $5,447 less: $484 against $5,931 to replace (Angi, from 4,360 projects). Angi puts replacement labor at $100 to $2,000, and removal and disposal at $150 to $4,500, more for a heavy cast-iron tub. The two sources on liners disagree widely, so get a liner priced for your tub before you compare.

When refinishing stops making sense

Houses here are old. In Belleville the median home was built in 1951, and 32.4% date from 1939 or earlier (Census Bureau, ACS 2020–2024). Across Essex County the median is 1958, with 29.1% built in 1939 or earlier (Census Reporter). Angi notes that cast iron was the standard tub before fiberglass and can last 100 years or more with care. The national guides agree on when refinishing is not the answer:

  • The tub leaks, is severely damaged or has large cracks. Angi says to consider replacing it.
  • The tub is old, leaking or moldy. This Old House says refinishing it is not worth it.
  • Major cracks, rust spots or deep scratches. This Old House says reglazing may not cover them.
  • The tile is natural stone, which Angi says is often not recommended for reglazing.
  • The damage is behind or under the tub: loose tile, soft walls, a spongy floor. A coating on the surface does not reach it.
Corner beside an old white cast-iron tub with worn enamel, where the wall finish is peeling, the subfloor has rotted through to the insulation and the drain pipe is exposed
A 1920s cast-iron tub beside a floor rotted by years of water escaping past the shower curtain. A public-domain (CC0) photo by Gipsonj, not an AB job.

Past that point the job is a remodel: the old tub or the surround comes out, the plumbing and the walls behind are opened and fixed, and new tile goes up over waterproofing. That is our bathroom remodeling work, published from $12,000 including material. Retiling the same 70 sq ft surround at our published tile labor of $10 to $20 and up a square foot is from $700 to $1,400 before the tile, the demolition and the backer board; reglazing it runs $280 to $840 at market rates. The bathroom remodel cost guide has the line items and a calculator.

Remodeled bathroom with marble-look wall tile, sliding glass tub door and vanity
A bathroom we remodeled: marble-look wall tile, a sliding glass tub door and a vanity.

Permits: refinishing needs none, relining is different

New Jersey's construction code lists the work it treats as ordinary maintenance: no permit, no inspection and no notice to the town (N.J.A.C. 5:23-2.7). For a bathtub and its tile, the rule says:

  • Refinishing existing fixtures is ordinary maintenance (5:23-2.7(c)2ii, one of the rule's plumbing items). A tub is a plumbing fixture.
  • Relining is not. The same line says relining fixtures is not ordinary maintenance, so a liner over the old tub falls outside the no-permit list. Ask your town's construction office what it needs.
  • Swapping the tub for a similar one is ordinary maintenance only when the piping arrangement does not change (5:23-2.7(c)2x). Adding to, altering or relocating piping never is (5:23-2.7(b)6).
  • Interior painting is ordinary maintenance (5:23-2.7(c)1i). The rule does not name tile reglazing separately.

Our New Jersey permit guide covers the bathroom work that does need one, and who files it.

Sales tax on refinishing

New Jersey taxes a contractor's labor on repairs and maintenance, and exempts it on most capital improvements (S&U-2, S&U-3). Neither bulletin names tub or tile refinishing. Their nearest examples:

  • Taxed: fixing loose bath tiles is a repair, and repainting the interior of a house is maintenance. Repairs, the bulletins say, restore property to working condition without adding to its value or prolonging its life.
  • Exempt: new bathroom fixtures and a new tiled bath are capital improvements, as is replacing all of the tiles with upgraded or improved materials. You give the contractor a completed Form ST-8, which only the property owner can issue.
  • On taxable work the rate is 6.625%, charged on the labor. The contractor may not charge you sales tax on the materials and supplies.
  • A lump-sum bill for taxable work that does not separate materials from labor is taxed on the whole amount (S&U-2).

So ask each bidder how the job is classified, and to show labor and materials on separate lines.

Fumes: what OSHA and EPA say

Refinishing commonly means removing the old finish, then applying a new coating, usually a synthetic finish such as polyurethane or epoxy, and it often involves methylene chloride, acids and isocyanates (OSHA and NIOSH hazard alert). The federal record:

  • At least 14 worker deaths since 2000 related to refinishing tubs with methylene chloride strippers, by OSHA and NIOSH's 2013 count. OSHA's 2016 FatalFacts put it at 17 between 2000 and 2015.
  • Exposure to as little as six ounces of a methylene chloride product has been enough to cause death. In a small bathroom the vapor collects in the tub and the worker's breathing zone (OSHA).
  • OSHA's workplace limits are 25 parts per million over eight hours and 125 over any 15 minutes (29 CFR 1910.1052).
  • Since November 22, 2019, methylene chloride may not be made, processed or sold for consumer paint and coating removal, and EPA encourages consumers to stop using any they still have (EPA).
  • EPA's broader 2024 rule on methylene chloride was vacated by the Fifth Circuit in September 2026 (East Fork Enterprises v. EPA). EPA says the decision did not affect the 2019 consumer ban or OSHA's workplace limits.

Questions worth asking any refinisher before work starts:

  • Which stripper and coating will you use, and does either contain methylene chloride?
  • How will the bathroom be ventilated while you work and while the coating cures?
  • Who should stay out of the room, and for how long?
  • When can we use the tub again? Angi says the surface needs 24 to 48 hours to set and cure.

How long it lasts, and what the words mean

  • A reglazed tub: 10 to 15 years (Angi). At least 10 years with proper care (This Old House).
  • Reglazed tile: 10 to 15 years, less under high moisture and foot traffic (HomeGuide).
  • The job: two to five hours for a standard tub, then 24 to 48 hours to set and cure (Angi).
  • Care: non-abrasive, bleach-free cleaners only; stronger ones can eat away the new coating (This Old House).

Refinishing, reglazing and resurfacing are used for the same job. This Old House uses refinishing for the whole restoration and reglazing for the coating applied at the end, and calls resurfacing usually synonymous with refinishing.

Comparing refinishing bids

What the top phone results for “bathtub refinishing cost” in Belleville said on November 17, 2026:

  • A Long Island, New York refinisher: about $480 on average, $300 to $700 in total.
  • A Facebook post: refinishing normally under $400, against an average of $1,700 to $3,800 to remove and replace a tub.
  • A refinishing company's repair guide: the factors that set the price, and no dollar figure.

None gave a New Jersey price, and none covered the tile, the permit line or the tax. Compare bids on the same questions:

  • Is chip, crack and rust repair in the price, or extra?
  • Is the tile surround included, and is grout repair priced?
  • Is old caulk removed and the tub recaulked?
  • What exactly does the written warranty cover, and what does it exclude?
  • How is the job classified for sales tax, and are labor and materials on separate lines?

New Jersey's home improvement rules cover painting, repairing and restoring a home (N.J.A.C. 13:45A-16.1A). Any guarantee or warranty has to be given to you in writing, with its exclusions, when the bid is presented and again when the contract is signed; a contract over $500, and every change to it, has to be in writing and signed (N.J.A.C. 13:45A-16.2(a)11 and 12). You can also check a New Jersey contractor's registration.

Where we refinish tubs and tile

From our office at 65 Newark Ave, Unit 1 in Belleville, across all 22 Essex County towns: Belleville, Bloomfield, Glen Ridge, East Orange, Nutley, Orange, Montclair, Newark, West Orange, Verona, Irvington, South Orange, Cedar Grove, Essex Fells, Maplewood, Caldwell, North Caldwell, Roseland, West Caldwell, Livingston, Millburn, Fairfield. We also work in Union and Passaic counties.

Every town we serve

Bathtub and tile refinishing questions

How much does bathtub refinishing cost in New Jersey?

None of the cost guides we read prices a New Jersey town. Angi's 2026 national average is $484, from 7,355 projects, and most homeowners pay $337 to $631. Its New York, N.Y. page puts the normal range at $353 to $570. These are market figures, not an AB quote.

How much does it cost to resurface a bath?

The same as refinishing it: This Old House says resurfacing is usually another word for refinishing. Angi's 2026 range is $337 to $631; This Old House gives $335 to $630.

How much does it cost to paint a bathtub?

A do-it-yourself refinishing kit costs $30 to $150 in Angi's 2026 guide, and Angi says kits work best for small touch-ups. Since November 22, 2019, methylene chloride may not be sold for consumer paint and coating removal (EPA), and OSHA has tied at least 14 refinishing worker deaths since 2000 to strippers that contain it.

Is it hard to refinish a bathtub?

This Old House says it is not a difficult project, but not exactly simple: the old finish is sanded or stripped, chips and cracks are filled, and several coats go on. OSHA's warning for refinishers names methylene chloride, acids and isocyanates among the chemicals the process often uses.

How long does tub refinishing last?

Angi puts a reglazed tub at 10 to 15 years, and HomeGuide gives reglazed tile the same 10 to 15 years, less where it takes heavy moisture and foot traffic. This Old House says a refinished tub lasts at least 10 years with proper care, cleaned with non-abrasive, bleach-free cleaners.

How much does tile reglazing cost?

$4 to $12 a square foot in both Angi's and HomeGuide's guides. HomeGuide puts bathroom, tub and shower tile of 40 to 100 sq ft at $300 to $1,200. A three-wall surround around a 5 ft tub, tiled 7 ft high, is about 70 sq ft: $280 to $840 at those rates, our arithmetic.

Do I need a permit to refinish a tub in New Jersey?

No. Refinishing existing fixtures is ordinary maintenance under N.J.A.C. 5:23-2.7, which needs no permit, no inspection and no notice to the town. Relining a tub is not ordinary maintenance. Swapping the tub for a similar one is ordinary maintenance only when the piping stays as it is.

Is refinishing cheaper than replacing a tub?

By a wide margin. Angi's averages are $484 to refinish and $5,931 to replace, $5,447 apart. Angi says to consider replacing a tub that is severely damaged, has large cracks or leaks.

Do you refinish tubs and tile?

Yes, we refinish bathtubs and tile. We have not published a price for it, which is why every figure on this page is a market figure with its source. Call us or send the estimate form with the tub's material and how much tile is involved.

Sources

  1. Angi, How Much Does Bathtub Refinishing Cost?

    National average and range from 7,355 projects, cost by material and type, inlays, reglazing and liners, lifespan, cure time and kits. Updated September 23, 2026. With its New York, N.Y. figures, updated October 6, 2025.

  2. Angi, How Much Does Bathtub Replacement Cost?

    Average and range from 4,360 projects, labor, removal and disposal, and a new surround. Updated October 20, 2026.

  3. Angi, How Much Does It Cost to Reglaze Tile?

    Per square foot, the national average, prep and grout add-ons, and which tile reglazes well. Updated October 12, 2026.

  4. HomeGuide, How Much Does Tile Reglazing Cost?

    Per square foot, bathroom tile of 40 to 100 sq ft, kits and lifespan. Updated July 21, 2025.

  5. This Old House, How Much Does Bathtub Refinishing Cost?

    Cost by material and type, liners, when not to refinish, terms and care. Updated March 17, 2026.

  6. N.J.A.C. 5:23-2.7, ordinary maintenance

    (c)2ii refinishing and relining fixtures, (c)2x replacing a fixture with a similar one, (c)1i painting, (b)6 piping.

  7. N.J. Division of Taxation, S&U-2, Sales Tax and Home Improvements

    Capital improvements, repairs and maintenance, and the lump-sum rule. Rev. 9/17. With S&U-3, Contractors and New Jersey Taxes (Rev. 5/25, the 6.625% rate) and Form ST-8.

  8. N.J.A.C. 13:45A-16.2, home improvement practices

    Written warranties, (a)11; written, signed contracts over $500, (a)12. The definition of home improvement is in 13:45A-16.1A.

  9. OSHA and NIOSH, Methylene Chloride Hazards for Bathtub Refinishers (OSHA 3623, 2013)

    At least 14 deaths since 2000, how the vapor collects, the chemicals used, and OSHA's limits. With OSHA's FatalFacts No. 13 (2016).

  10. U.S. EPA, Risk Management for Methylene Chloride

    The 2019 consumer paint and coating removal ban, and the 2024 rule vacated in September 2026. Last updated November 13, 2026.

  11. U.S. Census Bureau, ACS 2020–2024, year structure built, Belleville (via Census Reporter)

    Tables B25034 and B25035, with Essex County.

Want a number for your tub and tile?

Call to talk the job through with Andrew, or send the details and Andrew will get back to you. An in-person estimate is $50, and it comes off your contract when you sign.