Skip to content
AB Contracting & Design LLC
Call

What construction and remodeling cost in North Jersey

These are AB Contracting & Design's own prices for the jobs we're asked about most. Unless a row says otherwise, the price is labor only and material is extra. Your written proposal always has the final number.

Price list

AB Contracting & Design prices
JobPrice
New finished floor space (North Jersey average)Labor and material, on averageWorked out in full$400 per sq ft
New restaurant, about 1,000 sq ftBuilding, electrical, plumbing, fire protection, hood / vent / suppression and architectural drawings$400K+ on average
Bathroom remodelIncludes materialWorked out in full$12K+ per bathroom
DeckLabor; material billed separatelyWorked out in full$30 per sq ft + material
GAF Timberline HDZ shingle roofLabor and material$11 per sq ft
Basement renovationLabor; material extraWorked out in full$15K+ per project
Electrical fixture installLabor$300+ per fixture
Plumbing fixture installLabor$950+ per fixture
Drywall, hung and finishedLabor and material, spackled and sanded ready to prime (minimum job size applies)$220 per 4×8 sheet
Tile installationLabor; you pick the tile from our suppliersWorked out in full$10–$20+ per sq ft
Retaining wall (Cambridge Sigma 8 block)Includes the block$40 per block
Mason blockIncludes materialsWorked out in full$25 per block
Gutters with micro-mesh guardsLabor$25 per linear ft
Vinyl or laminate floor installLaborWorked out in full$5+ per sq ft
Vinyl window installLabor$500+ per window

Prices as published by AB Contracting & Design LLC. Material costs follow the market.

Twenty-one cost guides worked out in full

  • Bathroom remodel cost in New Jersey

    Our per-item prices, a calculator for your room, and when New Jersey requires a permit or charges sales tax.

  • Home addition cost in New Jersey

    The $400 average worked out for 11 sizes, a calculator, and the approvals in the order the state requires them.

  • Deck cost in New Jersey

    Our $30 labor rate worked out by deck size, composite against wood, and the permit a New Jersey deck needs.

  • Basement finishing cost in New Jersey

    Our prices at four basement sizes, a calculator for yours, and the New Jersey rules that shape a finished basement.

  • Restaurant build-out cost in New Jersey

    What our $400K+ for a new 1,000 sq ft restaurant covers, two contractors' published costs line by line, and the state's health, fire and permit steps.

  • Drywall cost in New Jersey

    Our $220 a sheet worked out by room, a sheet calculator, and when New Jersey needs a permit or charges sales tax.

  • Vinyl plank and laminate flooring cost in New Jersey

    Our $5 a square foot labor worked out room by room, a calculator, vinyl against laminate by room, and the 6.625% New Jersey tax on floor labor.

  • Tile installation cost in New Jersey

    Our $10 to $20 a square foot labor worked out for bathroom floors, showers, backsplashes and whole floors, a calculator, and which tile labor New Jersey taxes.

  • Drop ceiling installation cost in New Jersey

    What a standard drop ceiling costs at 2026 national rates, a calculator with our drywall price beside it, basement headroom, office ceilings, and New Jersey's permit and tax rules.

  • Garage conversion cost in New Jersey

    What a garage conversion costs by garage size and by room at 2026 national rates, each part with our published price beside it, New Jersey's code for converted garages, and Belleville's parking rules.

  • Hardwood floor installation cost in New Jersey

    What installing solid or engineered hardwood costs by room size and per square foot at 2026 market rates, what New Jersey homeowners were quoted, the moisture checks, and New Jersey's tax on floor labor.

  • Front porch renovation cost in New Jersey

    What rebuilding, replacing or adding a front porch costs by size and part by part at 2026 market rates, what a roof adds, our published prices beside them, and when New Jersey needs a permit.

  • Porch enclosure cost in New Jersey

    Screens, three-season and four-season rooms side by side and by porch size at market rates, what New Jersey's code asks before a porch counts as a room, Belleville's permit fee, and our own porch conversion.

  • Cinder block wall cost in New Jersey

    Our $25 a block, a calculator for your wall, national prices side by side, and when New Jersey needs a permit for a garden wall, a fence, a shed or a retaining wall.

  • Stone veneer cost in New Jersey

    What installing stone veneer costs per square foot from four published sources, a calculator for your wall, what goes behind the stone, and why New Jersey needs a permit for it.

  • Garage addition cost in New Jersey

    What an attached one-, two- or three-car garage costs by size and part by part at 2026 market rates, adding a bay or a room on top, our published prices beside them, and New Jersey's fire, frost, permit and tax rules.

  • Load-bearing wall removal cost in New Jersey

    What taking out a load-bearing wall costs at 2026 market rates by house and part by part, the beam, the engineer and the permit, Belleville's permit fee worked out, and our prices for the patching after.

  • Kitchen remodel cost in New Jersey

    A refresh, a mid-range remodel and an upscale one at Middle Atlantic prices, the line items, what an older Essex County house adds, the permit and sales tax rules, Belleville's fees worked out, and our trade prices for the parts.

  • Second story addition cost in New Jersey

    What going up costs: a full or partial second story and shed or gable dormers from New Jersey and national sources, what the engineer checks, Belleville's height limit and permit fee, and the rent while you are out.

  • Office and retail fit-out cost in New Jersey

    What an office build-out costs per square foot in North Jersey in 2026, at four office sizes and three levels of work, retail space, the landlord's allowance, and New Jersey's permit, accessibility and tax rules.

  • Bathtub and tile refinishing cost in New Jersey

    What refinishing a tub and reglazing its tile cost at 2026 market rates, by tub and by square foot, against relining or replacing, New Jersey's permit and sales tax rules, and what EPA and OSHA say about the fumes.

Worked examples

The same prices, applied to a few common job sizes.

Worked price examples
JobComes to
Composite deck, 12 × 16 ft192 sq ft × $30about $5,760labor, plus material
Composite deck, 12 × 24 ft288 sq ft × $30about $8,640labor, plus material
Home addition, 400 sq ft400 sq ft × $400about $160,000labor and material
Shingle roof, 2,000 sq ft2,000 sq ft × $11about $22,000labor and material
Drywall, 30 sheets30 sheets × $220about $6,600labor and material
Gutters with guards, 120 ft120 ft × $25about $3,000labor

How we price

Start with a phone call; phone estimates are free. If the project is a fit, we visit. An in-person estimate is $50, and it comes off your contract when you sign.

We price every job from our own costs, line by line, so you can compare it with any other bid. Proposals are valid for 30 days. After that, pricing may change with the market.

Comparing bids? Check that each contractor holds an active New Jersey home improvement registration first. Our NJ contractor license lookup guide shows the search on the state's verification site, step by step. Our own number is 13VH11431800.

How you pay

  1. 25–50%deposit when the contract is signed
  2. 25%at an agreed milestone
  3. 25%at completion, with any change orders

Large projects can use a retainer and a smaller deposit, with more frequent payments tied to completed work. Financing is available on every project.

More about estimates and payments

Common cost questions

How much does a deck cost per square foot in New Jersey?

Our deck labor is $30 per square foot, with material billed on top. A 12 × 16 ft deck is about $5,760 in labor before decking, framing and railing material.

What does it cost to build out a restaurant?

Our average for a new restaurant of about 1,000 sq ft is $400,000 and up, including building work, electrical, plumbing, fire protection, the hood, vent and suppression system, and architectural drawings.

Are these prices labor only?

Unless a row says material is included, yes: the price is labor only and material is extra. Your written proposal lists both.

Want your exact number?

Call to talk the job through with Andrew, or send the details and Andrew will get back to you. An in-person estimate is $50, and it comes off your contract when you sign.