Kitchen remodel cost, line by line
What each part of a kitchen adds, from Angi's guide, updated September 4, 2026. National market ranges, not our prices.
| Part of the kitchen | Market range |
|---|---|
| CabinetsStock $100 to $300 a linear foot, custom $500 to $1,200. Angi puts cabinets at 30% to 40% of the budget. | $2,000–$28,000 |
| CountertopsThe usual range. Quartz and other premium materials can pass $10,000. | $1,800–$4,400 |
| Backsplash$15 to $40 a square foot. | $500–$1,500 |
| AppliancesPer appliance. Installation adds $125 to $300 each. | Under $100–$5,000+ |
| Sink and faucetThe average sink and the average faucet, installed. Sinks run $210 to $2,000. | $420 + $260 |
| FlooringVinyl plank $3 to $7 a square foot, ceramic tile $4 to $40. | $1,000–$5,000 |
| LightingUnder-cabinet LED strips $230 to $300. | $500–$2,000+ |
| Repiping$7,500 on average. | $1,500–$15,000 |
| Moving a gas lineWhen the range moves to a new spot. | $375–$750 |
| ElectricianA new outlet $100 to $450; a panel upgrade $520 to $2,000. | $50–$100 / hour |
| PaintFor a 150 to 250 sq ft kitchen. | About $900 |
| DesignerOr $5 to $17 a square foot. | $100–$500 / hour |
| Permits, nationalAngi's national range. Belleville's fees are worked out below. | $460–$2,770 |
| General contractorOf the total project cost, for coordinating the trades. | 10%–20% |
Cabinets set the budget
Over the report's 30 linear feet, Angi's stock cabinet price comes to $3,000 to $9,000. Its custom price comes to $15,000 to $36,000. That is our arithmetic, for the cabinets alone.
Where the money goes in a small kitchen, in Angi's October 2026 breakdown:
- Cabinets 28%, labor 18%, appliances 14%.
- Countertops and backsplash 9%, flooring 7%.
- Paint and drywall 5%, lighting and electrical 4%, permits 4%.
- Design 3%, plumbing 3%, demolition 3%, cleanup 2%.
The backsplash and the floor each have their own guide with our labor prices: tile installation cost and vinyl and laminate flooring cost.
What an older Essex County house adds
Most homes here are old. In Essex County the median home was built in 1958, and 29.1% date from 1939 or earlier (Census Bureau, ACS 2020–2024). In Belleville the median is 1951, and 83.2% of homes were built before 1980 (Census Reporter). Opening the walls is where that age turns into cost:
- Wiring older than the appliances. A new outlet is $100 to $450 and a panel upgrade $520 to $2,000 in Angi's figures. Electricians cost 21% more an hour here than nationally.
- Original supply and drain lines. Repiping runs $1,500 to $15,000, $7,500 on average, in Angi's figures.
- Lead paint. 74.2% of Essex County homes were built before 1980. Paid work that disturbs paint in a home built before 1978 falls under EPA's lead rule: a certified firm, trained workers and lead-safe practices (EPA).
- Floors and walls out of level. New cabinets have to be shimmed and scribed to fit, labor that neither national source here itemizes.
- A wall in the way. Opening the kitchen to the dining room can mean taking out a load-bearing wall. That job, with its beam, engineer and permit, has its own load-bearing wall removal cost guide.

A general contractor quoted in Angi's guide advises adding a cushion to the budget for surprises, such as old plumbing that needs replacing.
Permits: it depends on what moves
New Jersey's construction code splits a kitchen into work that needs nothing, work that starts on notice, and work that needs the permit first.
No permit: ordinary maintenance
- Installing new cabinets, which the code lists as non-structural furnishings.
- Any new flooring material, and painting.
- New wall finishes on less than 25% of the wall area.
- Swapping a plumbing fixture for a similar one, with no change in the piping.
- Swapping a receptacle, switch or light fixture, or a stove or oven with no change in fuel.
Source: N.J.A.C. 5:23-2.7(c).
Never ordinary maintenance
- Adding, altering, replacing or relocating water, sewer, drain, gas, waste or vent piping (5:23-2.7(b)6). Moving the sink or a gas range falls here.
- New electrical wiring, beyond the small exceptions the code names.
- Cutting away any part of a load-bearing wall.
Minor work: starts on notice
In a one- or two-family house, some of that is minor work (N.J.A.C. 5:23-2.17A). It covers wiring for a new range or oven, up to five new outlets where the existing circuits and service can carry the load, and new fixtures in existing space that do not enlarge the water system. You notify the construction office before work starts and file the application within five business days. A requested inspection happens within three business days.
Everything else: the permit first
The office has 20 business days to approve or deny a complete application (5:23-2.16(a)). A home improvement contractor may not start until the permits are issued, and must give you the inspection certificates before the final payment is due (N.J.A.C. 13:45A-16.2(a)10).
The 2023 National Electrical Code took effect in New Jersey on August 17, 2026 (58 N.J.R. 8(2)). One change for kitchens: an island or peninsula counter no longer has to have an outlet, and one that is added has to be installed the way the code describes. Our guide to the 2024 code change covers the rest.
Belleville's permit fees, worked out
Belleville charges the building fee at $28 per $1,000 of the estimated cost of the work, with an $85 minimum. Plan review is 25% of that fee, paid before review and credited to the permit (Belleville Code § 12-1.3). The state adds $1.90 per $1,000 (N.J.A.C. 5:23-4.19(b)). Our arithmetic, treating the whole job price as the estimate, which is the high case:
| Estimated cost of the work | Building fee | State fee |
|---|---|---|
| $89,679, a mid-range remodel$627.75 of it paid up front for plan review. | $2,511.01 | $170.39 |
| $181,994, an upscale remodel$1,273.96 of it paid up front for plan review. | $5,095.83 | $345.79 |
The trade fees in the same code section:
- Plumbing: $15 per fixture, device or stack, $50 minimum. A sink and a dishwasher come to $30, so the $50 minimum applies.
- Gas: $30 to inspect each gas appliance.
- Electrical: $50 for 1 to 6 outlets, with switches and light fixtures counted as outlets; 7 to 50 add $50.
- Cooking equipment such as a range: $50 for one unit under 10 kW, $7 for each more, $75 for each unit over 10 kW.
A refresh that only swaps like for like may need no permit at all. Our New Jersey permit guide covers what other towns charge and who files.
Sales tax on a kitchen remodel
Most of a kitchen remodel is an exempt capital improvement in New Jersey. The Division of Taxation lists new kitchen cabinets, new kitchen fixtures, new electrical outlets and rewiring by name (S&U-3). What that means on your bill:
- No sales tax on that work, once you give the contractor a completed Form ST-8, the Certificate of Exempt Capital Improvement. Only the owner of the property can issue it.
- Materials are taxed once, upstream. The contractor pays sales tax when buying them and may not add it to your bill (S&U-2). Materials you buy yourself are taxed at the register.
- Flooring is the exception. Installing flooring is a taxable capital improvement, at 6.625%. On a 200 sq ft floor at our $5 a square foot, that is $66.25 of tax on $1,000 of labor.
- Repairs are taxed. Fixing faulty plumbing or a faulty outlet is a repair, not an improvement.
How long a kitchen remodel takes
From Angi's timeline guide, with the New Jersey permit clock beside it:
- A cosmetic refresh, such as painted cabinets and a new backsplash: one to two weeks.
- A midrange remodel, with new cabinets, countertops and appliances: four to eight weeks.
- A full remodel: eight to 12 weeks or more.
- Most kitchens: six to 10 weeks.
- Custom cabinets: six to eight weeks to build, so they are ordered early.
- The permit: up to 20 business days for the office to decide, or a start on notice for minor work.

Our kitchen remodeling page lays out the order we run the trades in, from demolition to the final inspection.
Our published prices for the trades in a kitchen
We have not published a price for a whole kitchen. We do publish prices for several of the trades inside one, so you can check those lines of any quote:
| Our published price | Price |
|---|---|
| Plumbing fixture installLabor, per fixture, such as a sink. | $950+ each |
| Electrical fixture installLabor, per fixture, such as a light. | $300+ each |
| Tile installationLabor; you pick the tile from our suppliers. | $10–$20+ / sq ft |
| Vinyl or laminate floor installLabor; material extra. | $5+ / sq ft |
| Drywall, hung and finishedPer 4 × 8 sheet, labor and material, ready to prime. A minimum job size applies. | $220 / sheet |
Read against the report's 200 sq ft kitchen, our arithmetic:
- Floor: 200 sq ft of vinyl plank or laminate at $5 is $1,000 in labor, plus $66.25 of tax.
- Backsplash: 30 sq ft of tile at $10 to $20 is $300 to $600 in labor.
- Sink: one plumbing fixture at $950 and up.
- Lights: 6 fixtures at $300 and up, from $1,800.
- None of these is a kitchen quote. Cabinets, counters, appliances, demolition, materials and permits are on top.

Every price we publish is on the price list.
Why published kitchen prices disagree
What the top results for these searches in Belleville said on November 17, 2026:
- A Lancaster, Pennsylvania design-build firm: $15 to $150 a square foot and $20,000 to $150,000 or more, quoting NerdWallet.
- A remodeler in Ohio, Kentucky and Tennessee: the 2025 Cost vs Value national averages, $28,458 to $164,104.
- A Maplewood contractor's New Jersey page: no figure beyond "tens of thousands".
- A Facebook group post asking what a 12 × 12 kitchen costs in New Jersey.
None of the three company pages gave an Essex County price, and a total means little until you know what it includes. Compare bids on the same questions:
- Which cabinets: stock, semi-custom or custom, and how many linear feet?
- Which counter material, and are the template, fabrication and sink cutout included?
- Do the sink, range and refrigerator stay where they are? If not, what does moving each one add?
- Who supplies the appliances, and is their hookup priced?
- Who files the permits, and are the fees in the number?
- Is the floor in the price, and is its sales tax shown?
- What happens, in writing, if the old walls hide bad wiring or pipes?
Changes to the contract have to be in writing and signed by both sides (N.J.A.C. 13:45A-16.2(a)12). Before you sign, you can also check a New Jersey contractor's registration.
Where we remodel kitchens
From our office at 65 Newark Ave, Unit 1 in Belleville, across all 22 Essex County towns: Belleville, Bloomfield, Glen Ridge, East Orange, Nutley, Orange, Montclair, Newark, West Orange, Verona, Irvington, South Orange, Cedar Grove, Essex Fells, Maplewood, Caldwell, North Caldwell, Roseland, West Caldwell, Livingston, Millburn, Fairfield. We also work in Union and Passaic counties.


